Digital Surface Roughness Tester SRT-6210

Features:

This instrument is compatible with four standards of  site to measure surface roughness of various machinery-processed parts, calculate corresponding and clearly display all measurement parameters. When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanism by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of

phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs

the measurement results on LCD.

◆ Multiple parameter measurement: Ra, Rz, Rq, Rt

◆ Highly sophisticated inductance sensor

◆Four wave filtering methods : RC, PC-RC, GAUSS and D-P

◆Built-in lithium ion rechargeable battery and control circuit with high capacity

◆Small in size, light in weight and easy to use

◆Can communicate with PC computer for statistics, printing and analyzing by the optional cable and the  software for RS232C interface.

◆Manual or automatic shut down. The tester can be switched off  by pressing  the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last  key operation.

◆The tester can memorize 7 groups of measurement results and measuring conditions for later use or download to PC.

◆Metric /Imperial Conversion

Specifications: